Plastic Injection Molding



We have been involved in plastic injection molding since 1999 and manufacture a wide range of products, including products to client specifications. Our manufacturing facility is based in China, where we have a wide range of machinery to suit your plastic injection molding needs. We have a fully-equipped Plastic Mold making room, with highly qualified contract toolmakers to satisfy any plastic injection molds needs you may have.

As a well-established plastic injection moulding business, we consider ourselves leaders in the moulding of a wide variety of plastic molding parts, including items such as rulers, pencil cases, ice buckets, lip-balm tubes, irrigation parts and many more.

We also have a number of clients who provide us with the moulds to manufacture exclusively for them.

Our experience and expertise in the manufacture and maintenance of tooling and moulds as well as high-quality machinery and production techniques makes us the right choice to satisfy your plastic injection moulding project requirements.

plastic injection moulding
plastic injection moulding

We pride ourselves on outstanding service and quality.

Call us and we will assist you with your plastic injection moulding needs, from drawing board to final products.

We offer below service

Injection Molding Solutions: HYX MOLD, is a fully service plastic mold and injection molding compay. Providing services from product inception and design- helping you get your ideas from informal to formal media. From there to tool building – making a precision mold of your product and completing the molding process. All the while, our top notch quality program will ensure the best finished product.

Injection Moulding: Injection moulding requires that plastic pellets be melted and then forced into the mould cavity. The plastification of the material in the barrel usually is facilitated by sheer and friction from a rotating screw that also feeds in new material. In thermoplastics the material is cooled in the mold until it can be ejected.

Fully AutomaticFully automatic molds run with no operator. They may utilize a variety of mechanical devices to facilitate part removal such as mold sweeps, air blasts or sprue pickers. They may contain core pulls, cams to remove undercuts, multiple plates, hot runner or insulated runner systems, unscrewing devices or any number of devices and techniques to improve efficiency.

Semi-automatic & Hand operated: Semi-automatic molds are typically mounted in the press and require an operator only to perform a specific operation of the cycle (i.e., remove a core, place an insert, remove the part from an undercut). Hand operated molds require an operator to physically remove the mold from the press and disassemble it to remove the molded part. They are used for very small quantities or parts that have undercuts, threads or other complicated features.

Prototype Tools: Prototype tools can produce thousands of parts and, if shrinkage is not a factor, a variety of materials can be tested. Modifying a prototype tool costs substantially less than the cost to change a production tool. Make your changes in this development phase, not after the parts go into production.

Compression Molding: Compression molding involves a heated mold in which the material charge is placed into the mold (often having been preheated) and the mold halves compress the material into shape.

Transfer Molding: Transfer molding is a process largely reserved for thermosets in which (much like the injection process) preheated material is transferred with a plunger into the closed mold cavity.

Pressure Forming: Pressure forming can refer to many materials and processes.

Call us and we will assist you with your plastic injection moulding needs, from drawing board to final product.



Plsatic Injection molding Company

Established in the year 2005, we, HYX MOLD., is one of the Plastic Injection Molding Company that manufacturers, suppliers, and exporters of Plstic molds, plastic molded parts, CNC machining parts, 3D printing parts,water level control systems. Proper use of raw material such as stainless steel and plastic parts has enabled us to manufacture our products as per international quality standards. These precisely engineered products are high in demand due to negligible maintenance and high performance. Further, we are also engaged in selling and purchasing new as well as used plastic machines. According to the need of clients, we also source machines from any part of the world.

Plastic Mold
Plastic Mold

We are backed by a robust manufacturing unit that is equipped with drilling, grinding and cutting machines. Our professionals are well-versed with the operations of these machines and help us in producing products as per the requirements of our respected clients. Further, we provide regular training to our professionals so that they can undertake refurbishing and retrofitting of injection molding machines with ease and accuracy.

We are headed by our chairman Mike Zheng, whose business insight has enabled us to establish strong presence in the market. Owing to his 11 years of immense industry experience and in-depth knowledge, we have garnered huge clientele in China.

Service Portfolio

Apart from manufacturing water level control systems, we also provide various services to our clients. These services are undertaken by experts, who use latest tools & equipment to assure timely execution of these services. Our continuum of services is appreciated by clients not only for flexibility but also for reliability.

We offer following services:

Apart from the above mentioned services, we are also engaged in selling and purchasing of new and used plastic machines.

Our Manufacturing Unit

Our state-of-the-art manufacturing unit that assists us in achieving organizational goals within short time frame. Fitted with modern machines and equipment, our manufacturing unit is spread over an area of 2,000 square feet and enables us to achieve massive production capacity of 500,000 units.

We use following machines at our manufacturing unit:

  • Cutting machine
  • Drilling machine
  • Grinding machine
  • CNC Machine
  • Injection Molding machine
  • Plastic mold making equipment

These machines help our professionals to manufacture products as per the specific requirements of our clients. Further, we regularly lubricate and oil these machines to maintain uniform rate of production.

Our Team

Our commendable position in the industry is the result of the perseverant efforts of our assiduous professionals. They work in sync with each other and make full use of optimum resources to manufacture flawless range of water level control system. Owing to the combined efforts of our professionals, we are able to fulfill ever increasing demands of various industries.

Our team includes:

  • Engineers
  • Technicians
  • Quality controllers
  • Research associates
  • Sales and marketing professional
  • Marketing representatives

These professionals assist us in producing products as per the specifications given by our clients. With the constant support of these professionals, we also provide refurbishing and retrofitting service for injection molding machines.

Research and Development

We gave developed a sophisticated research and development unit to manufacture technologically advanced range of water level control system. This unit helps our research associates to diversify our range of products. Our researchers conduct thorough research activities not only to find cost effective manufacturing techniques but also to improve the product’s design. Further, our researchers also carry out various market surveys to assure that our entire range is fairly priced in the domestic market. Due to the relentless efforts of our researchers, we always come out with the best solution to client’s problems.

Our Quality Assurance

Success of any organizational depends upon the quality of its products and services. We understand this and therefore, adhere to stringent quality norms while manufacturing water level control systems and executing retrofitting & refurbishing services. We have also appointed a team of quality experts, which assures that the stainless steel, plastic and other raw material are procured from trustworthy vendors of the industry. With the help of quality testing unit, our experts check the manufactured as well as sourced products on following parameters:

  • Durability
  • Test leakage
  • Tensile strength
  • Resistance to corrosion
  • Toughness
  • Electrical properties

Further, we also conduct leakage test on our range to assure the flow of best quality products from our premises.

Client Satisfaction

Gaining utmost satisfaction of our clients has always been our first priority therefore, we make sure that our range of water level control systems are manufactured as per their requirements. To assure that our range matches with desired quality norms, we make use of quality tested raw material such as stainless steel and plastic. We have also set up a modern research & development unit that helps us in catering to changing needs of our clients.

 We also maintain an efficient communication system so that the suggestions and opinions of clients can be used in enhancing the quality of our products. Further, we facilitate our clients with easy payment modes such as cash and demand draft so that our clients do not face any problem while conducting financial transactions with us.

Why Us?

Our presence in the industry has been possible due to our unrelenting efforts to meet the requirements of our clients. Following are some of the factors that enable us to stand apart from our competitors:

  • Use of tested raw material in manufacturing processes
  • Expertise & technical abilities to absorb fresh technologies
  • Modern infrastructure facility
  • Qualified team of professionals
  • Customized solutions

Mold Manufacturer China

HYX MOLD Technologies, founded in 1999, is one of the first Mold Manufacturer China Company, that manufacturers of double injection, overmolding and other type of plastic molds in their factory. HYX MOLD also manufactures optical grade parts such as light pipes and control buttons for electronics and telecommunication products. We have invested in hi-tech thermoforming for In Mold Decorating (IMD) since 2002.

With strong engineering and R&D capabilities, we have successfully developed unique twin and double injection molding processes utilizing rotating tooling. Since 1989, we have produced many varieties of 2-color key caps for HP, Lucent, Avaya (AT&T), and Alcatel.

Recently, over-molding of a soft touch elastomer TPE/TPR/TPU on the rigid plastic resin has become very popular. We have developed the process to combine a rigid plastic core and an elastomer skin. We are currently producing cellular phone housings, knife handles, PDA cases, and digital camera grips, power buttons for Acer, Kodak, Stanley, Bosch & Matsushita, Pioneer & Apple etc.

Our molding machines give us the latitude to produce various sizes of parts using the complex & precision single or multi-cavity molds for medical, industrial & sports parts as well. In 2006, we have successfully developed the deep drawing IMD forming process & IMD + 2K (2 material double injection molding) hybrid technologies to satisfy the customer’s state of Art product design. Our major IMD Applications – Notebook, Top Housing , PDA, POS Bezel, MP4, Keypad … customers as NCR, Zona, Chattanooga.

mold manufacturer china
mold manufacturer china

Company Goals

The primary goal of HYX MOLD Technologies is to work and grow with our customers from product conception, co-design, EDI (earlier design Involved) through the life cycle to improve quality and reduce overall cost. HYX MOLD’s engineering makes it possible to shorten the development cycle by adopting concurrent engineering and product management methodologies.

Utilizing advanced soft wares for mold design and construction, 5 axis cnc machine center of modern toolroom precision molding equipments and China facilities with 10,000 class clean rooms ISO 9001& ISO 13485 quality assurance procedures help HYX MOLD guarantees top quality parts and molds in conformance with our customers’ standards and expectations

We are more professional in double injecion molding or ovemoding, but if you need more than this injection molding service, want other type of plastic molds and molded parts, like auomotive molds and molding parts, electric housing molds and parts, medical plastic parts and molds, we highly recommend you go to https://www.plasticmold.net/ to requuire them supporting you, this mold manufacturer China Company will solve your issue.

Custom Injection Mold

Custom Injection Mold

The custom Injection mold is an excellent concept which assists the clients to acquire the needed custom plastic moulding parts within short running time. Sinomould is a pioneer in the custom mold manufacturing and it supply the world rated custom China moulds that deliver the exact specification or fundamental needs on plastic molding technology. The excellent design for various parts, lowest price, rapid turnaround, ISO 9001:2008 Certified are some of the highlights ensured for the clients around the universe while they engaged with Sinomould. The leading mould manufacturer delivers the quality products at a cheap cost.

The lightweight, long-lasting, sturdy, typical designs and varied shapes are some of the advantages delivered for the clients who choose the Sinomould firm. Any kind of demand related to the custom mold accessories such as hydraulic cylinder, hot runner and so forth obtained within a short time. The ground breaking technology implemented in entire process of injection molding and hence there is no worry about the moulding design and quality. Each and every need of the customer addressed here and the innovate ideas executed in every course of action to meet the cutthroat world. They implemented 2D and 3 dimension design and thorough drawings for the plastic accessories and the customer can quote their requirement through the plastic samples displayed in the WebPages. If they need any additional requirement, they can convey it through the exact quotation. The professionals of this firm assist the mold maker to select the exact steel and reduce the custom cost. If you want to know more information regarding the Custom Injection Mold, then you can refer through the company website: –https://www.plasticmold.net

Aotomotive Mold

Aotomotive Mold

With the competition in auto industry become more and more fierce, carmakers need to dsign new cars to meet consumers’ different requirments, and every car needs thousands of molds to make its parts.Almost 80% molds will be abandoned when make new type cars.
China is a big manufacturing country, also in injection mold making, with enough skillful designers, programming personel, mold fitters, CNC machine operators.
China mold  companies mainly located in Zhejiang, GuangDong, and Shanghai city, all of those cities are famous for plastic molds, for example, GC MOLD specilized in automotive molds making,  haoyuanxing specialized in house appliance molds, SINERE TECH, specialized in automobile and home appliance mold making.

Now Chinese mold enterprises make great achievement in research, development and innovation. Many new technology has been widely used, such as 3D design technology and application of information management,double-color injection molding technology.
As China molds factories pay more and more attention to trained qualified employees and management, as new technology applied, China mold industry will see in a vibrant period of development.

There are more than  1000 plastic mould factorys who make automobile mould

You can go to one of automobile mold maker by click here to know more about any type of plastic mold making.

It  seems Russia still in great need for automotive mould. A large part of the automotice mould is imported from Portugal, another small part is from Germany, China, Russia and other countries to export moulds. Imports from Russia’s point of view the type of mould, including plastic mould more automotive mould.

As the Russian Volga and Lada cars local momentum is not ideal, it still needs to introduce a large number of Russian America, Japan cars. But Russia’s potential purchasing power of a strong car, the government of Russia’s automotive industry has also given a positive attitude, so the prospects of Russia’s automotive industry is still very optimistic. Russia is expected to become future automotive, automotive plastic molds, stamping dies and automotive parts automotive imports surge in demand for a country that is Russia’s household plastic mould, metal stamping die machine, automotive mould will also be with the future development of the automobile industry and increased imports.
Domestic automobile mechanical metal mould companies can refer to research in depth under the Russian market, devote themselves to innovation, brand building, look forward to a share of the Russian market competition.